Ocean Crawler Neptune - Black - Prototype

The Neptune from Ocean Crawler has been designed to be the ultimate diving watch. Every single Ocean Crawler has been immersed in water and has been thoroughly tested to withstand pressures up to 2000 feet. The Neptune is a must-have under-water accessory for water sports enthusiasts who scuba dive, spearfish and even ocean-bed exploration.

This special edition watch features an internal rotating diving bezel which bears hour-markers filled with seven layers of Swiss C3 SuperLuminova. Powerful lume on the key elements guarantees perfect readability when deep diving.

The Neptune features an internal diving bezel in a compressor case design. A helium release valve is located at 9 o'clock. The production units will have Lume added to the dial as well as the internal bezel markers.

The movement inside is a regulated Sellita Sw-200 movement. It has a beat rate of 28,800 vibrations per hour and has been enhanced for added accuracy.

There are only 100 units made of the Neptune in Blue and all are stamped with a unique serial number.

A Must-Have Underwater Accessory

Every single Neptune has been immersed in water and has been thoroughly tested to withstand pressures much greater than those found under 2000 feet. This is why Ocean Crawler watches are your best friend for water sports, scuba diving, spearfishing and even ocean-bed exploration.

Not All Diver Watches Were Created Equal. This Is What Makes The Ocean Crawler The Best Diver Watch Available:

• True water resistance to 2000 feet or 600 meters
• All Sapphire Crystal
• Aluminum-Stainless Steel case with brushed finishes
• Automatic, precise diver watch – no batteries needed. Watch winds itself with the movement of your wrist.
• Thick domed sapphire crystal glass with 4.0mm thickness. An anti-reflective coating is applied to the domed glass to prevent any reflection underwater.
• Guaranteed to keep precise time for at least 5 years.

Technical Specs:

• Case Diameter (excluding crown): 44mm
• Case Thickness: 15.2mm, Lug-To-Lug: 49.5mm, Lug Width: 22mm
• Case Material: 316L Stainless steel and Aluminum
• Internal Bezel: Rotating Bezel with 120 Clicks and Swiss C3 Superluminova Markers
• Movement: Swiss-Made Selitta Sw-200
• Frequency: 28,800 vibrations per hour
• Water Resistance: 600 meters, 2000 feet or 60 ATM
• Power Reserve: 40 hours